For pyenv to install python correctly you should install the Python build dependencies.

Homebrew in macOS

  1. Consider installing with Homebrew:

    brew update
    brew install pyenv
  2. Then follow the rest of the post-installation steps under Basic GitHub Checkout, starting with #2 ("Configure your shell's environment for Pyenv").

  3. OPTIONAL. To fix brew doctor's warning ""config" scripts exist outside your system or Homebrew directories"

    If you're going to build Homebrew formulae from source that link against libpython like Tkinter or NumPy (This is only generally the case if you are a developer of such a formula, or if you have an EOL version of MacOS for which prebuilt bottles are no longer available and are using such a formula).

    To avoid them accidentally linking against a Pyenv-provided Python, add the following line into your interactive shell's configuration:

    • Bash/Zsh:

      alias brew='env PATH="${PATH//$(pyenv root)\/shims:/}" brew'
    • Fish:

      alias brew="env PATH=(string replace (pyenv root)/shims '' \"\$PATH\") brew"


Pyenv does not officially support Windows and does not work in Windows outside the Windows Subsystem for Linux. Moreover, even there, the Pythons it installs are not native Windows versions but rather Linux versions run through a compatibility layer -- so you won't get Windows-specific functionality.

If you're in Windows, we recommend using @kirankotari's pyenv-win fork -- which does install native Windows Python versions.

Automatic installer

Visit our other project:

Basic GitHub Checkout

This will get you going with the latest version of Pyenv and make it easy to fork and contribute any changes back upstream.

  1. Check out Pyenv where you want it installed. A good place to choose is $HOME/.pyenv (but you can install it somewhere else):

     git clone ~/.pyenv

    Optionally, try to compile a dynamic Bash extension to speed up Pyenv. Don't worry if it fails; Pyenv will still work normally:

     cd ~/.pyenv && src/configure && make -C src
  2. Configure your shell's environment for Pyenv

    Note: The below instructions for specific shells are designed for common shell setups; they also install shell functions into interactive shells only.
    If you have an uncommon setup and/or needs and they don't work for you, use the Advanced Configuration section below to figure out what you need to do in your specific case.

    General MacOS note: Make sure that your terminal app is configured to run the shell as a login shell (especially if you're using an alternative terminal app and/or shell). The configuration samples for MacOS are written under this assumption and won't work otherwise.

    • For Bash:

      • If your ~/.profile sources ~/.bashrc (Debian, Ubuntu, Mint):

        # the sed invocation inserts the lines at the start of the file
        # after any initial comment lines
        sed -Ei -e '/^([^#]|$)/ {a \
        export PYENV_ROOT="$HOME/.pyenv"
        a \
        export PATH="$PYENV_ROOT/bin:$PATH"
        a \
        ' -e ':a' -e '$!{n;ba};}' ~/.profile
        echo 'eval "$(pyenv init --path)"' >>~/.profile
        echo 'eval "$(pyenv init -)"' >> ~/.bashrc
      • If your ~/.bash_profile sources ~/.bashrc (Red Hat, Fedora, CentOS):

        sed -Ei -e '/^([^#]|$)/ {a \
        export PYENV_ROOT="$HOME/.pyenv"
        a \
        export PATH="$PYENV_ROOT/bin:$PATH"
        a \
        ' -e ':a' -e '$!{n;ba};}' ~/.bash_profile
        echo 'eval "$(pyenv init --path)"' >> ~/.bash_profile
        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
        echo 'eval "$(pyenv init --path)"' >> ~/.profile
        echo 'eval "$(pyenv init -)"' >> ~/.bashrc
      • If you have no ~/.bash_profile and your /etc/profile sources ~/.bashrc (SUSE):

        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
        echo 'eval "$(pyenv init --path)"' >> ~/.profile
        echo 'if command -v pyenv >/dev/null; then eval "$(pyenv init -)"; fi' >> ~/.bashrc
      • Otherwise if you have no stock ~/.profile or ~/.bash_profile (MacOS):

        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
        echo 'eval "$(pyenv init --path)"' >> ~/.profile
        echo 'if [ -n "$PS1" -a -n "$BASH_VERSION" ]; then source ~/.bashrc; fi' >> ~/.profile
        echo 'eval "$(pyenv init -)"' >> ~/.bashrc

        In MacOS, make sure that your terminal app runs the shell as a login shell.

      • Temporary environments (CI, Docker, batch jobs):

        In CI/build environments, paths and the environment are usually already set up for you in one of the above ways. You may only need to install Pyenv as a shell function into the (noninteractive) shell that runs the batch script, and only if you need subcommands that require pyenv to be a shell function (e.g. shell and Pyenv-Virtualenv's activate).

        echo 'eval "$(pyenv init -)"'

        If you are installing Pyenv yourself as part of the batch job, after installing the files, run the following in the job's shell to be able to use it.

        export PYENV_ROOT="$HOME/.pyenv"
        export PATH="$PYENV_ROOT/bin:$PATH"    # if `pyenv` is not already on PATH
        eval "$(pyenv init --path)"
        eval "$(pyenv init -)"

      General Bash warning: There are some systems where the BASH_ENV variable is configured to point to .bashrc. On such systems, you should almost certainly put the eval "$(pyenv init -)" line into .bash_profile, and not into .bashrc. Otherwise, you may observe strange behaviour, such as pyenv getting into an infinite loop. See #264 for details.

    • For Zsh:

      • MacOS, if Pyenv is installed with Homebrew:

        echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
        echo 'eval "$(pyenv init -)"' >> ~/.zshrc

        Make sure that your terminal app runs the shell as a login shell.

      • MacOS, if Pyenv is installed with a Git checkout:

        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zprofile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zprofile
        echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
        echo 'eval "$(pyenv init -)"' >> ~/.zshrc

        Make sure that your terminal app runs the shell as a login shell.

      • Other OSes:

        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zprofile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zprofile
        echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
        echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
        echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
        echo 'eval "$(pyenv init --path)"' >> ~/.profile
        echo 'eval "$(pyenv init -)"' >> ~/.zshrc
    • For Fish shell:

      Execute this interactively:

      set -Ux PYENV_ROOT $HOME/.pyenv
      set -U fish_user_paths $PYENV_ROOT/bin $fish_user_paths

      And add this to ~/.config/fish/

      status is-login; and pyenv init --path | source
      status is-interactive; and pyenv init - | source

      If Fish is not your login shell, also follow the Bash/Zsh instructions to add to ~/.profile.

      Proxy note: If you use a proxy, export http_proxy and https_proxy, too.

  3. Restart your login session for the changes to profile files to take effect. E.g. if you're in a GUI session, you need to fully log out and log back in.

    In MacOS, restarting terminal windows is enough (because MacOS runs shells in them as login shells by default).

  4. Install Python build dependencies before attempting to install a new Python version.

  5. Install Python versions into $(pyenv root)/versions. For example, to download and install Python 2.7.8, run:

    pyenv install 2.7.8

    NOTE: If you need to pass a configure option to a build, please use the CONFIGURE_OPTS environment variable.

    NOTE: If you want to use proxy to download, please set the http_proxy and https_proxy environment variables.

    NOTE: If you are having trouble installing a Python version, please visit the wiki page about Common Build Problems.


If you've installed Pyenv using Homebrew, upgrade using:

brew upgrade pyenv

If you've installed Pyenv using the instructions above, you can upgrade your installation at any time using Git.

To upgrade to the latest development version of pyenv, use git pull:

cd $(pyenv root)
git pull

To upgrade to a specific release of Pyenv, check out the corresponding tag:

cd $(pyenv root)
git fetch
git tag
git checkout v0.1.0

Uninstalling pyenv

The simplicity of pyenv makes it easy to temporarily disable it, or uninstall from the system.

  1. To disable Pyenv managing your Python versions, simply remove the pyenv init invocations from your shell startup configuration. This will remove Pyenv shims directory from PATH, and future invocations like python will execute the system Python version, as it was before Pyenv.

    pyenv will still be accessible on the command line, but your Python apps won't be affected by version switching.

  2. To completely uninstall Pyenv, remove all configuration lines for it from your shell startup configuration, and then remove its root directory. This will delete all Python versions that were installed under $(pyenv root)/versions/ directory:

    rm -rf $(pyenv root)

    If you've installed Pyenv using a package manager, as a final step, perform the Pyenv package removal. For instance, for Homebrew:

    brew uninstall pyenv

Advanced Configuration

Skip this section unless you must know what every line in your shell profile is doing.

pyenv init is the only command that crosses the line of loading extra commands into your shell. Coming from RVM, some of you might be opposed to this idea.

Also see the Environment variables section for the environment variables that control Pyenv's behavior.

  • eval "$(pyenv init --path)":

    1. Sets up your shims path. This is the only requirement for pyenv to function properly. You can do this by hand by prepending $(pyenv root)/shims to your $PATH.

    eval "$(pyenv init --path)" is supposed to be run in your session's login shell startup script -- so that all processes in the session get access to Pyenv's functionality and it only runs once, avoiding breaking PATH in nested shells (e.g. shells started from editors/IDEs).

    In Linux, GUI managers typically act as a sh login shell, running /etc/profile and ~/.profile at their startup. MacOS' GUI doesn't do that, so its terminal emulator apps run their shells as login shells by default to compensate.

  • eval "$(pyenv init -)":

    1. Installs autocompletion. This is entirely optional but pretty useful. Sourcing $(pyenv root)/completions/pyenv.bash will set that up. There is also a $(pyenv root)/completions/pyenv.zsh for Zsh users.

    2. Rehashes shims. From time to time you'll need to rebuild your shim files. Doing this on init makes sure everything is up to date. You can always run pyenv rehash manually.

    3. Installs pyenv into the current shell as a shell function. This bit is also optional, but allows pyenv and plugins to change variables in your current shell, making commands like pyenv shell possible. The sh dispatcher doesn't do anything crazy like override cd or hack your shell prompt, but if for some reason you need pyenv to be a real script rather than a shell function, you can safely skip it.

    eval "$(pyenv init -)" is supposed to run at any interactive shell's startup (including nested shells) so that you get completion and convenience shell functions.

To see exactly what happens under the hood for yourself, run pyenv init - or pyenv init --path.

If you don't want to use pyenv init and shims, you can still benefit from pyenv's ability to install Python versions for you. Just run pyenv install and you will find versions installed in $(pyenv root)/versions, which you can manually execute or symlink as required.

Uninstalling Python Versions

As time goes on, you will accumulate Python versions in your $(pyenv root)/versions directory.

To remove old Python versions, pyenv uninstall command to automate the removal process.

Alternatively, simply rm -rf the directory of the version you want to remove. You can find the directory of a particular Python version with the pyenv prefix command, e.g. pyenv prefix 2.6.8.

Command Reference


Environment variables

You can affect how pyenv operates with the following settings:

name default description
PYENV_VERSION Specifies the Python version to be used.
Also see pyenv shell
PYENV_ROOT ~/.pyenv Defines the directory under which Python versions and shims reside.
Also see pyenv root
PYENV_DEBUG Outputs debug information.
Also as: pyenv --debug <subcommand>
PYENV_HOOK_PATH see wiki Colon-separated list of paths searched for pyenv hooks.
PYENV_DIR $PWD Directory to start searching for .python-version files.
PYTHON_BUILD_ARIA2_OPTS Used to pass additional parameters to aria2.
If the aria2c binary is available on PATH, pyenv uses aria2c instead of curl or wget to download the Python Source code. If you have an unstable internet connection, you can use this variable to instruct aria2 to accelerate the download.
In most cases, you will only need to use -x 10 -k 1M as value to PYTHON_BUILD_ARIA2_OPTS environment variable


The pyenv source code is hosted on GitHub. It's clean, modular, and easy to understand, even if you're not a shell hacker.

Tests are executed using Bats:

bats test

Please feel free to submit pull requests and file bugs on the issue tracker.

Version History



The MIT License

当前网页内容, 由 大妈 ZoomQuiet 使用工具: ScrapBook :: Firefox Extension 人工从互联网中收集并分享;
若有不妥, 欢迎评注提醒:


订阅 substack 体验古早写作:

点击注册~> 获得 100$ 体验券: DigitalOcean Referral Badge

关注公众号, 持续获得相关各种嗯哼:


关于 ~ DebugUself with DAMA ;-)
公安备案号: 44049002000656 ...::